TV RemoteUniversal Smart TV Remote
TV RemoteUniversal • Local Network

BPL TV Remote Control Online

A virtual BPL TV remote that finds your TV automatically and pairs in a few taps. It works over your home Wi-Fi only; nothing goes to the cloud.

Read moreRead less

BPL smart TVs run Android TV on many models. This remote controls them with the Android TV Remote v2 protocol. Support for Android TV / Google TV is beta: it is built and tested against simulated TVs, so some BPL models and software versions may behave differently.

The remote finds your TV on the local network and shows the buttons: power, input, D-pad, volume, channels, media keys, numbers, colour keys, apps and a text box for the on-screen keyboard.

“Online” here means in your browser. Commands travel over your own Wi-Fi and are never sent to the internet, there is no sign-up, and the only data kept is a pairing token so your TV reconnects next time.

No TV connected

Not connected

Tap “Add / Scan for TVs” to begin.

VOL
CH
Number & colour keys

Launch Apps

Send Text to TV

Open the TV's search or password box first, then send. Not every TV app accepts remote typing.

Touchpad

Swipe mode

Swipe to navigate
Tap to select

Control a BPL TV from your phone: step-by-step guide

This guide shows how to use a BPL TV remote online from your phone, tablet or laptop. People also search for: BPL TV remote app, BPL smart TV remote online, BPL TV remote on phone, virtual BPL TV remote. They all mean the same thing: use a browser instead of the physical remote.

How to use the BPL TV remote online

  1. Connect your phone or laptop to the same Wi-Fi as your TV and turn the TV on.
  2. Open the remote at the top of this page and let the scan run.
  3. When your BPL TV appears, tap it.
  4. Pair if asked (see below), then use the buttons above.
  5. Next time the remote reconnects automatically.

Pair your BPL TV

  1. Open the remote and tap your TV in the list.
  2. A 6-character code appears on the TV screen.
  3. Type the code into the box on the page and press Pair. It is remembered afterwards.

If no code appears, wake the TV fully (not deep standby), make sure it is on the same Wi-Fi, then press Rescan and tap it again.

Where to find the IP address on a BPL TV

Settings → Network & Internet → your Wi-Fi → IP address (or Device Preferences → About → Status). Open your router's “connected devices” page (often 192.168.1.1 or 192.168.0.1) or use a network app such as Fing.

Which BPL TVs are supported?

BPL smart TVs run Android TV on many models. The remote speaks Android TV / Google TV (beta). Features such as typing, app launch and power differ per model and year. Buttons the TV does not support show a short message instead of failing.

BPL TV remote online: troubleshooting

TV remote control online for other brands

BPL TV remote FAQ

Is this BPL TV remote control online free?

Yes. It is free, has no sign-up and shows no ads.

Do I need to install an app on my phone to control my BPL TV?

No. There is nothing to install on your phone or computer. Open this page, let it scan, and pair your TV.

Will it work with my BPL TV model?

It targets Android TV / Google TV. BPL smart TVs run Android TV on many models. Support is beta and has been tested on simulated TVs, not on every BPL model, so try it and tell us through the feedback form if something does not work.

How do I pair my BPL TV?

A 6-character code appears on the TV screen. Type the code into the box on the page and press Pair. It is remembered afterwards.

Can I control volume, apps and typing on my BPL TV?

Yes, where your BPL model allows it: power, input, D-pad, volume, channels, media keys, number keys and app launch, plus typing into search boxes. Keys a model does not support show a short message instead of failing silently.

Can I switch my BPL TV on with it?

It can switch a BPL TV off. Switching on needs Wake-on-LAN, which depends on the model and is usually available over Ethernet only. Enter the TV's MAC address once under Wake TV.

What if my BPL TV is not listed after the scan?

Check the TV is on and on the same Wi-Fi, then press Rescan. If it still does not appear, choose Add manually and enter the TV's IP address. If your BPL model is not recognised, send it through the feedback form.

Can I control more than one BPL TV?

Yes. Each paired TV is saved under Your TVs, and you can give each one its own name, such as Living Room or Bedroom.

Is it safe to use with my BPL TV?

Yes. Commands stay on your home network, there is no sign-up, and the remote only talks to private network addresses.

Where is the pairing code on my TV?

The 6-character code appears on the TV screen after you tap it in the list. Type it into the box on this page and press Pair.

Why can't the remote find my BPL TV?

Check that the TV is fully on, that your phone and the TV are on the same Wi-Fi, that the router has no “AP / client isolation”, and that no VPN is active. You can always add the TV by IP address.

BPL TV remote reviews and ratings

Star ratings count only reviews that visitors submitted and we approved. Cards marked “Sample” are examples of how reviews look; they are not real customers and are not counted.

Feedback & feature requests

Your message is stored privately and is not shared with anyone or sent to third-party services.

Rate this remote

Your rating

Reviews are public. Please do not include personal details.

Starting… Local Network Only No Internet Required