TV RemoteUniversal Smart TV Remote
TV RemoteUniversal • Local Network

Intex TV Remote Control Online

A virtual Intex TV remote that finds your TV automatically and pairs in a few taps. It works over your home Wi-Fi only; nothing goes to the cloud.

Read moreRead less

Intex smart TVs run Android TV on many models. This remote controls them with the Android TV Remote v2 protocol. Support for Android TV / Google TV is beta: it is built and tested against simulated TVs, so some Intex models and software versions may behave differently.

The remote finds your TV on the local network and shows the buttons: power, input, D-pad, volume, channels, media keys, numbers, colour keys, apps and a text box for the on-screen keyboard.

“Online” here means in your browser. Commands travel over your own Wi-Fi and are never sent to the internet, there is no sign-up, and the only data kept is a pairing token so your TV reconnects next time.

No TV connected

Not connected

Tap “Add / Scan for TVs” to begin.

VOL
CH
Number & colour keys

Launch Apps

Send Text to TV

Open the TV's search or password box first, then send. Not every TV app accepts remote typing.

Touchpad

Swipe mode

Swipe to navigate
Tap to select

Intex TV remote online: setup guide

This guide shows how to use a Intex TV remote online from your phone, tablet or laptop. People also search for: Intex TV remote app, Intex smart TV remote online, Intex TV remote on phone, virtual Intex TV remote. They all mean the same thing: use a browser instead of the physical remote.

How to use the Intex TV remote online

  1. Connect your phone or laptop to the same Wi-Fi as your TV and turn the TV on.
  2. Open the remote at the top of this page and let the scan run.
  3. When your Intex TV appears, tap it.
  4. Pair if asked (see below), then use the buttons above.
  5. Next time the remote reconnects automatically.

Pair your Intex TV

  1. Open the remote and tap your TV in the list.
  2. A 6-character code appears on the TV screen.
  3. Type the code into the box on the page and press Pair. It is remembered afterwards.

If no code appears, wake the TV fully (not deep standby), make sure it is on the same Wi-Fi, then press Rescan and tap it again.

Where to find the IP address on a Intex TV

Settings → Network & Internet → your Wi-Fi → IP address (or Device Preferences → About → Status). Open your router's “connected devices” page (often 192.168.1.1 or 192.168.0.1) or use a network app such as Fing.

Which Intex TVs are supported?

Intex smart TVs run Android TV on many models. The remote speaks Android TV / Google TV (beta). Features such as typing, app launch and power differ per model and year. Buttons the TV does not support show a short message instead of failing.

Intex TV remote online: troubleshooting

TV remote control online for other brands

Intex TV remote FAQ

Is this Intex TV remote control online free?

Yes. It is free, has no sign-up and shows no ads.

Do I need to install an app on my phone to control my Intex TV?

No. There is nothing to install on your phone or computer. Open this page, let it scan, and pair your TV.

Will it work with my Intex TV model?

It targets Android TV / Google TV. Intex smart TVs run Android TV on many models. Support is beta and has been tested on simulated TVs, not on every Intex model, so try it and tell us through the feedback form if something does not work.

How do I pair my Intex TV?

A 6-character code appears on the TV screen. Type the code into the box on the page and press Pair. It is remembered afterwards.

Can I control volume, apps and typing on my Intex TV?

Yes, where your Intex model allows it: power, input, D-pad, volume, channels, media keys, number keys and app launch, plus typing into search boxes. Keys a model does not support show a short message instead of failing silently.

Can I switch my Intex TV on with it?

It can switch a Intex TV off. Switching on needs Wake-on-LAN, which depends on the model and is usually available over Ethernet only. Enter the TV's MAC address once under Wake TV.

What if my Intex TV is not listed after the scan?

Check the TV is on and on the same Wi-Fi, then press Rescan. If it still does not appear, choose Add manually and enter the TV's IP address. If your Intex model is not recognised, send it through the feedback form.

Can I control more than one Intex TV?

Yes. Each paired TV is saved under Your TVs, and you can give each one its own name, such as Living Room or Bedroom.

Is it safe to use with my Intex TV?

Yes. Commands stay on your home network, there is no sign-up, and the remote only talks to private network addresses.

Where is the pairing code on my TV?

The 6-character code appears on the TV screen after you tap it in the list. Type it into the box on this page and press Pair.

Why can't the remote find my Intex TV?

Check that the TV is fully on, that your phone and the TV are on the same Wi-Fi, that the router has no “AP / client isolation”, and that no VPN is active. You can always add the TV by IP address.

Intex TV remote reviews and ratings

Star ratings count only reviews that visitors submitted and we approved. Cards marked “Sample” are examples of how reviews look; they are not real customers and are not counted.

Feedback & feature requests

Your message is stored privately and is not shared with anyone or sent to third-party services.

Rate this remote

Your rating

Reviews are public. Please do not include personal details.

Starting… Local Network Only No Internet Required