TV RemoteUniversal Smart TV Remote
TV RemoteUniversal • Local Network

Element TV Remote Control Online

Lost the remote? Control your Element TV from any browser on your Wi-Fi. It works over your home Wi-Fi only; nothing goes to the cloud.

Read moreRead less

Element TVs run Roku TV or Fire TV Edition. This remote controls them with Roku's External Control Protocol (ECP). Support for Roku OS is beta: it is built and tested against simulated TVs, so some Element models and software versions may behave differently.

Open this page on a phone or laptop that shares the Wi-Fi with your TV. The remote scans the network, recognises the brand and shows each TV as a card. Tap yours, approve the pairing prompt if there is one, and the status bar reads “Connected to Element TV at your TV's IP”.

“Online” here means in your browser. Commands travel over your own Wi-Fi and are never sent to the internet, there is no sign-up, and the only data kept is a pairing token so your TV reconnects next time.

Some Element models use Amazon Fire TV instead. The scan decides by what your TV actually answers, so those models are handled too.

No TV connected

Not connected

Tap “Add / Scan for TVs” to begin.

VOL
CH
Number & colour keys

Launch Apps

Send Text to TV

Open the TV's search or password box first, then send. Not every TV app accepts remote typing.

Touchpad

Swipe mode

Swipe to navigate
Tap to select

How to use a Element TV remote online

This guide shows how to use a Element TV remote online from your phone, tablet or laptop. People also search for: Element TV remote app, Element smart TV remote online, Element TV remote on phone, virtual Element TV remote. They all mean the same thing: use a browser instead of the physical remote.

How to use the Element TV remote online

  1. Connect your phone or laptop to the same Wi-Fi as your TV and turn the TV on.
  2. Open the remote at the top of this page and let the scan run.
  3. When your Element TV appears, tap it.
  4. Pair if asked (see below), then use the buttons above.
  5. Next time the remote reconnects automatically.

Pair your Element TV

  1. Open the remote and tap your TV in the list.
  2. No code is needed. Roku TVs just need network control turned on.
  3. The page shows Connected straight away.

Enable Settings → System → Advanced system settings → Control by mobile apps → Network access (Default or Permissive).

Where to find the IP address on a Element TV

Settings → Network → About. Open your router's “connected devices” page (often 192.168.1.1 or 192.168.0.1) or use a network app such as Fing.

Which Element TVs are supported?

Element TVs run Roku TV or Fire TV Edition. The remote speaks Roku OS (beta). Features such as typing, app launch and power differ per model and year. Buttons the TV does not support show a short message instead of failing.

Element TV remote online: troubleshooting

TV remote control online for other brands

Element TV remote FAQ

Is this Element TV remote control online free?

Yes. It is free, has no sign-up and shows no ads.

Do I need to install an app on my phone to control my Element TV?

No. There is nothing to install on your phone or computer. Open this page, let it scan, and pair your TV.

Will it work with my Element TV model?

It targets Roku OS. Element TVs run Roku TV or Fire TV Edition. Support is beta and has been tested on simulated TVs, not on every Element model, so try it and tell us through the feedback form if something does not work.

How do I pair my Element TV?

No code is needed. Roku TVs just need network control turned on. The page shows Connected straight away.

Can I control volume, apps and typing on my Element TV?

Yes, where your Element model allows it: power, input, D-pad, volume, channels, media keys, number keys and app launch, plus typing into search boxes. Keys a model does not support show a short message instead of failing silently.

Can I switch my Element TV on with it?

It can switch a Element TV off. Switching on needs Wake-on-LAN, which depends on the model and is usually available over Ethernet only. Enter the TV's MAC address once under Wake TV.

What if my Element TV is not listed after the scan?

Check the TV is on and on the same Wi-Fi, then press Rescan. If it still does not appear, choose Add manually and enter the TV's IP address. If your Element model is not recognised, send it through the feedback form.

Can I control more than one Element TV?

Yes. Each paired TV is saved under Your TVs, and you can give each one its own name, such as Living Room or Bedroom.

Is it safe to use with my Element TV?

Yes. Commands stay on your home network, there is no sign-up, and the remote only talks to private network addresses.

Why does Roku need network control turned on?

Roku accepts remote commands only when Control by mobile apps is set to Default or Permissive under Settings → System → Advanced system settings.

Why can't the remote find my Element TV?

Check that the TV is fully on, that your phone and the TV are on the same Wi-Fi, that the router has no “AP / client isolation”, and that no VPN is active. You can always add the TV by IP address.

Element TV remote reviews and ratings

Star ratings count only reviews that visitors submitted and we approved. Cards marked “Sample” are examples of how reviews look; they are not real customers and are not counted.

Feedback & feature requests

Your message is stored privately and is not shared with anyone or sent to third-party services.

Rate this remote

Your rating

Reviews are public. Please do not include personal details.

Starting… Local Network Only No Internet Required