TV RemoteUniversal Smart TV Remote
TV RemoteUniversal • Local Network

Polaroid TV Remote Control Online

Your Polaroid TV remote, online: scan, pair once, and it reconnects every time. It works over your home Wi-Fi only; nothing goes to the cloud.

Read moreRead less

Some Polaroid smart TVs run Android TV or Roku TV. This remote controls them with the Android TV Remote v2 protocol. Support for Android TV / Google TV is beta: it is built and tested against simulated TVs, so some Polaroid models and software versions may behave differently.

Open this page on a phone or laptop that shares the Wi-Fi with your TV. The remote scans the network, recognises the brand and shows each TV as a card. Tap yours, approve the pairing prompt if there is one, and the status bar reads “Connected to Polaroid TV at your TV's IP”.

“Online” here means in your browser. Commands travel over your own Wi-Fi and are never sent to the internet, there is no sign-up, and the only data kept is a pairing token so your TV reconnects next time.

Some Polaroid models use Roku OS instead. The scan decides by what your TV actually answers, so those models are handled too.

No TV connected

Not connected

Tap “Add / Scan for TVs” to begin.

VOL
CH
Number & colour keys

Launch Apps

Send Text to TV

Open the TV's search or password box first, then send. Not every TV app accepts remote typing.

Touchpad

Swipe mode

Swipe to navigate
Tap to select

Polaroid TV remote online: setup guide

This guide shows how to use a Polaroid TV remote online from your phone, tablet or laptop. People also search for: Polaroid TV remote app, Polaroid smart TV remote online, Polaroid TV remote on phone, virtual Polaroid TV remote. They all mean the same thing: use a browser instead of the physical remote.

How to use the Polaroid TV remote online

  1. Connect your phone or laptop to the same Wi-Fi as your TV and turn the TV on.
  2. Open the remote at the top of this page and let the scan run.
  3. When your Polaroid TV appears, tap it.
  4. Pair if asked (see below), then use the buttons above.
  5. Next time the remote reconnects automatically.

Pair your Polaroid TV

  1. Open the remote and tap your TV in the list.
  2. A 6-character code appears on the TV screen.
  3. Type the code into the box on the page and press Pair. It is remembered afterwards.

If no code appears, wake the TV fully (not deep standby), make sure it is on the same Wi-Fi, then press Rescan and tap it again.

Polaroid TV IP address, step by step

Settings → Network & Internet → your Wi-Fi → IP address (or Device Preferences → About → Status). Open your router's “connected devices” page (often 192.168.1.1 or 192.168.0.1) or use a network app such as Fing.

Which Polaroid TVs are supported?

Some Polaroid smart TVs run Android TV or Roku TV. The remote speaks Android TV / Google TV (beta). Features such as typing, app launch and power differ per model and year. Buttons the TV does not support show a short message instead of failing.

Polaroid TV remote online: troubleshooting

TV remote control online for other brands

Polaroid TV remote FAQ

Is this Polaroid TV remote control online free?

Yes. It is free, has no sign-up and shows no ads.

Do I need to install an app on my phone to control my Polaroid TV?

No. There is nothing to install on your phone or computer. Open this page, let it scan, and pair your TV.

Will it work with my Polaroid TV model?

It targets Android TV / Google TV. Some Polaroid smart TVs run Android TV or Roku TV. Support is beta and has been tested on simulated TVs, not on every Polaroid model, so try it and tell us through the feedback form if something does not work.

How do I pair my Polaroid TV?

A 6-character code appears on the TV screen. Type the code into the box on the page and press Pair. It is remembered afterwards.

Can I control volume, apps and typing on my Polaroid TV?

Yes, where your Polaroid model allows it: power, input, D-pad, volume, channels, media keys, number keys and app launch, plus typing into search boxes. Keys a model does not support show a short message instead of failing silently.

Can I switch my Polaroid TV on with it?

It can switch a Polaroid TV off. Switching on needs Wake-on-LAN, which depends on the model and is usually available over Ethernet only. Enter the TV's MAC address once under Wake TV.

What if my Polaroid TV is not listed after the scan?

Check the TV is on and on the same Wi-Fi, then press Rescan. If it still does not appear, choose Add manually and enter the TV's IP address. If your Polaroid model is not recognised, send it through the feedback form.

Can I control more than one Polaroid TV?

Yes. Each paired TV is saved under Your TVs, and you can give each one its own name, such as Living Room or Bedroom.

Is it safe to use with my Polaroid TV?

Yes. Commands stay on your home network, there is no sign-up, and the remote only talks to private network addresses.

Where is the pairing code on my TV?

The 6-character code appears on the TV screen after you tap it in the list. Type it into the box on this page and press Pair.

Why can't the remote find my Polaroid TV?

Check that the TV is fully on, that your phone and the TV are on the same Wi-Fi, that the router has no “AP / client isolation”, and that no VPN is active. You can always add the TV by IP address.

Polaroid TV remote reviews and ratings

Star ratings count only reviews that visitors submitted and we approved. Cards marked “Sample” are examples of how reviews look; they are not real customers and are not counted.

Feedback & feature requests

Your message is stored privately and is not shared with anyone or sent to third-party services.

Rate this remote

Your rating

Reviews are public. Please do not include personal details.

Starting… Local Network Only No Internet Required