TV RemoteUniversal Smart TV Remote
TV RemoteUniversal • Local Network

Samsung TV Remote Control Online

A virtual Samsung TV remote that finds your TV automatically and pairs in a few taps. It works over your home Wi-Fi only; nothing goes to the cloud.

Read moreRead less

Samsung Smart TVs from about 2016 run Tizen. This remote controls them with the Samsung Tizen remote WebSocket. Support for Samsung Tizen is beta: it is built and tested against simulated TVs, so some Samsung models and software versions may behave differently.

Open this page on a phone or laptop that shares the Wi-Fi with your TV. The remote scans the network, recognises the brand and shows each TV as a card. Tap yours, approve the pairing prompt if there is one, and the status bar reads “Connected to Samsung TV at your TV's IP”.

“Online” here means in your browser. Commands travel over your own Wi-Fi and are never sent to the internet, there is no sign-up, and the only data kept is a pairing token so your TV reconnects next time.

No TV connected

Not connected

Tap “Add / Scan for TVs” to begin.

VOL
CH
Number & colour keys

Launch Apps

Send Text to TV

Open the TV's search or password box first, then send. Not every TV app accepts remote typing.

Touchpad

Swipe mode

Swipe to navigate
Tap to select

Samsung TV remote online: setup guide

This guide shows how to use a Samsung TV remote online from your phone, tablet or laptop. People also search for: Samsung TV remote app, Samsung smart TV remote online, Samsung TV remote on phone, virtual Samsung TV remote. They all mean the same thing: use a browser instead of the physical remote.

How to use the Samsung TV remote online

  1. Connect your phone or laptop to the same Wi-Fi as your TV and turn the TV on.
  2. Open the remote at the top of this page and let the scan run.
  3. When your Samsung TV appears, tap it.
  4. Pair if asked (see below), then use the buttons above.
  5. Next time the remote reconnects automatically.

Pair your Samsung TV

  1. Open the remote and tap your TV in the list.
  2. A prompt “Allow device?” appears on the TV. Choose Allow with the TV's own remote.
  3. The page shows Connected. The pairing token is stored so you only do this once.

If you pressed Deny earlier, open Settings → General → External Device Manager → Device Connect Manager → Device List, remove the entry and pair again.

Samsung TV IP address, step by step

Settings → General → Network → Network Status → IP Settings. Open your router's “connected devices” page (often 192.168.1.1 or 192.168.0.1) or use a network app such as Fing.

Which Samsung TVs are supported?

Samsung Smart TVs from about 2016 run Tizen. The remote speaks Samsung Tizen (beta). Features such as typing, app launch and power differ per model and year. Buttons the TV does not support show a short message instead of failing.

Samsung TV remote online: troubleshooting

TV remote control online for other brands

Samsung TV remote FAQ

Is this Samsung TV remote control online free?

Yes. It is free, has no sign-up and shows no ads.

Do I need to install an app on my phone to control my Samsung TV?

No. There is nothing to install on your phone or computer. Open this page, let it scan, and pair your TV.

Will it work with my Samsung TV model?

It targets Samsung Tizen. Samsung Smart TVs from about 2016 run Tizen. Support is beta and has been tested on simulated TVs, not on every Samsung model, so try it and tell us through the feedback form if something does not work.

How do I pair my Samsung TV?

A prompt “Allow device?” appears on the TV. Choose Allow with the TV's own remote. The page shows Connected. The pairing token is stored so you only do this once.

Can I control volume, apps and typing on my Samsung TV?

Yes, where your Samsung model allows it: power, input, D-pad, volume, channels, media keys, number keys and app launch, plus typing into search boxes. Keys a model does not support show a short message instead of failing silently.

Can I switch my Samsung TV on with it?

It can switch a Samsung TV off. Switching on needs Wake-on-LAN, which depends on the model and is usually available over Ethernet only. Enter the TV's MAC address once under Wake TV.

What if my Samsung TV is not listed after the scan?

Check the TV is on and on the same Wi-Fi, then press Rescan. If it still does not appear, choose Add manually and enter the TV's IP address. If your Samsung model is not recognised, send it through the feedback form.

Can I control more than one Samsung TV?

Yes. Each paired TV is saved under Your TVs, and you can give each one its own name, such as Living Room or Bedroom.

Is it safe to use with my Samsung TV?

Yes. Commands stay on your home network, there is no sign-up, and the remote only talks to private network addresses.

Why does my Samsung TV ask “Allow device?”

The TV asks the first time a new remote connects. Choose Allow once; the remote stores a token so the question is not repeated.

Why can't the remote find my Samsung TV?

Check that the TV is fully on, that your phone and the TV are on the same Wi-Fi, that the router has no “AP / client isolation”, and that no VPN is active. You can always add the TV by IP address.

Samsung TV remote reviews and ratings

Star ratings count only reviews that visitors submitted and we approved. Cards marked “Sample” are examples of how reviews look; they are not real customers and are not counted.

Feedback & feature requests

Your message is stored privately and is not shared with anyone or sent to third-party services.

Rate this remote

Your rating

Reviews are public. Please do not include personal details.

Starting… Local Network Only No Internet Required